Code-blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE Uživatelský manuál stáhnout pdf (Strana 22)

Code Blue

•

259 Hedcor Street

•

Holland, MI 49423 USA

•

800.205.7186

•

www.codeblue.com

GU-160-Cpage 22 of 45

CB 4 Series

Administrator Guide

14 CB 4-r Installation Instructions

1.0 PRE-INSTALLATION

1.1 Electrical preparation – The unit may have supply wires run from either A) behind the unit

through the wall, or B) below the unit using an external conduit through the bottom of the unit.

Holes in the back and bottom of the unit have been provided for this purpose.

2.0 INSTALLATION PROCEDURES

2.1 Mark the mounting holes – In order to comply with the Americans with Disabilities Act (ADA)

of 1990, the speakerphone button(s) should be positioned between 34 and 48 inches from

grade level (Consult an ADA specialist in your area to verify local and federal guidelines).

2.2 Drill all marked holes.

2.3 Secure the housing to the wall – Four anchors of appropriate size and type should be used

to securely fasten the housing to the wall or pole mount.

IMPORTANT: If wiring is coming in from the back, ensure that the conduit is aligned at this time.

2.4 Connect electrical and communications wiring. Follow all federal and local codes that apply.

See diagrams next page

15-1/4

10-1/4

5-3/4

2-3/4

4-1/16

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 44 45

Žádné komentáře

Code-blue CB 4-S SIGNATURE WALL/POLE MOUNT ENCLOSURE Uživatelský manuál Strana 22