Code-blue IA500-S SINGLE BUTTON ANALOG SURFACE MOUNT Uživatelský manuál Strana 12
- Strana / 17
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-144-Epage 12 of 17
IA500
Administrator Guide
7 Audio Programming Mode
Audio programming is normally performed once all other programming has been completed. These
commands allow the installer/programmer to ne tune the IA500’s audio settings to maximize the
performance of the attached phone line services.
Field audio programming can have a negative effect on the performance of the IA500 if the person
implementing these changes is not thoroughly familiar with telecommunication systems.
NOTE: All changes can easily be reversed by using 99 - # at any time during the AUDIO PRO-
GRAMMING MODE session (i.e., 99 - # resets all programming modications back to factory default
settings).
1. Call the IA500 by dialing its assigned phone number or extension.
2. Upon answering, the unit will emit a short beep.
3. The unit automatically enters Monitoring Mode.
4. You have two minutes to initiate Audio Programming Mode.
5. Dial 8 - 2258 - # to enter into live monitoring mode.
a. As described in the chart on page 14 (Figure 4), command options include
Speaker Level, Microphone Sensitivity and Background Noise Filter, among others.
6. If the programming command is correct the unit will emit a single beep; an incorrect entry
will trigger a triple beep.
7. To close the programming session or to disconnect from the IA500, dial * # (Figure 1).
Command Description Command Range Default Example
81 Speaker Output Level 00-15 07 Lower the Speaker Level from 07
to 03 by dialing: 81-03-#
82 Microphone Sensitivity 00-15 07 To decrease the Microphone Sen-
sitivity from 07 to 03, dial: 82-03-#
83 Phone Line Receive
Gain
00-15 02 Increase the Phone Line Receive
Gain from 02 to 05 by dialing: 83-
05-#
87 Background Noise
Filter
1 = On
2 = Off
2 To turn on the Background Noise
Filter from 2 to 1, dial: 87-1-#
Filter Delay Speed 3 = no delay
4 = 10ms delay
3 Remove any Filter Delay Speed by
dialing: 87-3-#
Add a 10ms Delay by dialing: 87-
4-#
Figure 4
Související produkty a manuály pro Komunikace Code-blue IA500-S SINGLE BUTTON ANALOG SURFACE MOUNT
(30 stránky)Electrolux EKC60465 manuales
Manuales del propietario y guías del usuario para Accesorios de procesador / mezclador de alimentos Electrolux EKC60465.
Ofrecemos 1 manuales en pdf Electrolux EKC60465 para descargar gratis por tipos de documentos: Manual de usuario
Komentáře k této Příručce